-
QQ咨詢
- 在線咨詢
-
電話咨詢
- 13515772997
設計來源：根據意大利客戶提供的視頻圖片及要求，吸收柔版印刷機的元素,，共同開發的一款組合式柔版印刷機,。
Design source: based on the video images and requirements provided by Italian customers, it absorbs the elements of flexographic printing presses, and jointly develops a satellite composite flexographic printing press
特點Features：
1.從放料到收料超短距離,，僅6.8米,。
From the discharge to receiving a very short distance, only 6.8 meters.
2.自主研發的特制刮刀,，彌補高速飛墨,，減少了溶劑在空氣中的揮發,。
Self-developed special scraper to make up for high-speed flying ink, reducing the solvent in the air of volatile.
3.反復印刷長度203-635MM,，填補層疊式柔版印刷機印刷長度不夠的空白,。
Repeated printing length 203-635MM, to fill the laminated flexo printing machine printing length is not enough blank.
4.采用衛星式輪轉機套色方式，套色精準,，印刷穩定,。
Using satellite rotary machine sets color, color chromatography precision, printing stability.
5.承印材料：PVC：35~70μm OPP：20~70μm BOPP：20~60μm PE：35~100μm NY：20~50μm PET：20~60μm CPP：20~60μm紙張：20~250g/㎡不干膠等材料。
Printing material: PVC: 35 to 70 μm OPP: 20 to 70 μm BOPP: 20 to 60 μm PE: 35 to 100 μm NY: 20 to 50 μm PET: 20 to 60 μm CPP: 20 to 60 μm Paper: 20 to 250 g / Other materials.
5. 制版周期短,、成本低制一副多色凹版滾筒的周期為5?10天,，而柔印版制作為5小時。柔性版視印刷面積而定版材大小,，比凹印滾筒成本低得多,。
The period of plate making is short, the cost is low, the period of multi-color gravure cylinder is 5-10 days, but the flexography is 5 hours. The flexography depends on the printing area and the size of the plate, which is much lower than the cost of gravure drum.
6. 印前預熱，印后風刀干燥設計,。解決衛星式印刷機各印刷單元之間距離太短,，油墨干燥不良時容易造成的蹭臟。
Pre-pre-press, printed after the wind knife drying design. Solve the satellite printing press between the printing unit is too short, easy to cause dirty ink dirty.
8.1-6色可根據需要定制,，寬度300-1600根據需要定制,。
1-6 color can be customized according to need, width 300-1600 customized according to need
9.工藝1放料、2自動恒張力,、3特制刮刀,、4印刷單元、5牽引,、6自動恒張力,、7收料
Sections:1 discharge, 2 automatic constant tension, 3 special scraper, 4 printing unit, 5 traction, 6 automatic constant tension, 7 receipts
主要技術參數Main Technical Variables：
機 型 Model of machine WT-650 WT-850 WT-1050
印刷寬度 Width of Printing 650mm 850mm 1050mm
印刷速度 Printing Speed 10-200m/min 10-200m/min 10-200m/min
對版精度 Version Accuracy <0.05mm <0.05mm <0.05mm
印刷長度 Length of Printing 203-635mm 203-635mm 203-635mm
料卷直徑 Diameter of Roll 900mm 900mm 900mm
總 功 率 Total Power 16kw 18kw 20kw
外形尺寸 Outline Dimension 3000x1400x1600mm 3000x1600x1600mm 3000x1800x1600mm
駐俄羅斯辦事處：
電話：+79520967066
+79967870616
郵箱：[email protected]
地址：Гжатская 22/2
聯系人：Вова.
